Symex Hot-Rod Torch

Hot-Rod FEATURES

• Safety lock trigger
• 100% unrestricted oxygen flow
• Easy-grip handle for maximum control
• Solid, functional metal hand-shield
• 100% brass internal parts
• Easy-grip brass tightening nut
• Interchangeable 1/4" and 3/8" O.D. brass collets.

---

The Q.C. HOT-ROD Can Help

The Q.C. Hot-Rod is the most innovative exothermic cutting tool available. The HOT-ROD can melt or pierce virtually any material. The specially designed internal configuration makes the HOT-ROD the most productive, cost-efficient, cutting rod available. The internal case gives the operator a smooth even burn and an unrestricted flow to blow material away from the cut. The HOT-ROD can melt all steels from mild carbon to stainless steel. The HOT-ROD can melt any exotic metal such as aluminum, magnesium, brass, copper, etc. The HOT-ROD will even melt concrete. The advantage of using the HOT-ROD exothermic lance over an oxy-acetylene torch is that there is no need for pre-heating or cleaning the material to cut it. Make easy work of renovation or demolition. Repair equipment and bridges. The Q.C. HOT-ROD can solve many of your cutting problems.

Hot-Rod SIZES

• The Q.C. HOT-ROD, with flared tip, can be purchased in 3/8" (.375) outside diameter. This outside diameter has proven to be the most efficient size for small exothermic cutting lances. The Q.C. HOT-ROD can be purchased in 2,3 and 4 foot lengths.

The real advantage to the Q.C. HOT-ROD is that you can couple the rod lengths together and move as far away from the work as you desire.

Connect Quick Couple for extended length

• The STANDARD HOT-ROD, without flared end, can also be purchased in 1/4" (.250) outside diameter, for use with the Hot-Rod Torch. Standard Hot-Rods are also available in 2, 3, and 4 foot lengths. Sections cannot be connected for extended lengths.

Q.C. HOT-ROD FEATURES

• NO WASTED ROD - With the new Q.C. HOT-ROD the entire rod is consumed and none of the rod is wasted.
• BEST PIERCING ROD - With the free-flow of oxygen through the Q.C. HOT-ROD you can pierce much more rapidly than all other exothermic rods. By coupling the Q.C. HOT-ROD together you can pierce a hole to any depth you desire.
• NO CARBON RESIDUE - With the Q.C. HOT-ROD you can obtain a clean, precise cut or gouge with no carbon residue left to grind before welding.
• CUTTING EDGE - The Q.C. HOT-ROD is an ideal tool for putting a cutting edge on loaders. The Q.C. HOT-ROD can burn through dirt and rust on all machinery.
• PORTABILITY - The Q.C. HOT-ROD can be used to cut in areas that are hard to reach with a torch. The Q.C. HOT-ROD can be used in remote out-of-the-way places.
• ABSOLUTE BEST APPLICATION - The Q.C. HOT-ROD is great for piercing large bolt, cut rivets, cut stubborn nuts from large bolts easily and efficiently.
• FAST TO OPERATE - Using the Q.C. HOT-ROD requires no special training. The set-up is very simple.

Just instert the non-flared end of the Q.C. HOT-ROD
into the easy-grip brass tightening nut.



Turn the brass nut clockwise to tighten.
The HOT-ROD is secured and ready to use.



Turn on the oxygen, strike the HOT-ROD
against a striker plate and cut.

 Download PDF of Product Sheet